 |
YOUR SHOPPING CART
if you have a friend or colleague who would find this page interesting!
Call Us Mon-Fri (11.30AM - 8.30PM Excluding public bank holidays)
UK-07768 206649
VU meter 994-VU-VT Analogue Display
The 994VU-VT is a stereo VU meter assembly housed in an ABS enclosure designed to display a representation of the average value of a stereo audio input signal sourced from connected equipment including media streamers, CD players, tape decks, set top boxes and other media devices.
Two pairs of gold plated RCA connectors on the rear panel are used to connect the unit in series with the RCA connection between the source device and a suitable amplifier. An IEC C13 connector (Not included with units shipped to USA) is used to connect mains power to the device at any input voltage between 85VAC and 250VAC at 50 or 60HZ.
A combined premium quality rotary potentiometer and switch fitted with a black aluminium fluted knob on the left-hand side of the front panel controls the VU meter back-light brightness and allows the user to turn the appliance off and on although the unit has an automatic standby function which allows the unit to be left on at all times, switching the lighting off in the absence of an audio input signal lasting approximately 15 minutes or longer.
The VU meter movements are positioned on the right of the combined rotary mains switch and potentiometer. They are scaled from -20 to +5 dB and a percentage scale from 0 to 100% is included. The assembly is 16cmD, 16cmW and 6.5cmH and weighs approximately 515 grams excluding the mains lead and connector.
We calibrate the meters to 0.7745V RMS at 0dB at 1KHZ but they can be set to consumer level (300mV RMS) or professional level (1.228V RMS) if required. Speaker input levels can also be set for applications where low level signal input is not available.
Backlighting is provided by internal white LEDs and the brightness can be adjusted from off to a dim warm white to bright white using the rotary mains switch and potentiometer control. Adjustments for zeroing the needles inside the instruments are located towards the bottom of the meter movements and can be corrected if necessary using a small flat screwdriver. The meters are elegant assemblies finished in black with an off-white scale and a visible movement coil assembly.
You can open a close-up view of the meters in a new tab by clicking the image on the right of the page.
4 units in stock! (Please note for USA postal regions a 23% tax applies to cover shipping costs)
The 994VU-VT is a stereo VU meter assembly housed in an ABS enclosure designed to display a representation of the average value of a stereo audio input signal sourced from connected equipment including media streamers, CD players, tape decks, set top boxes and other media devices.
Two pairs of gold plated RCA connectors on the rear panel are used to connect the unit in series with the RCA connection between the source device and a suitable amplifier. An IEC C13 connector (Not included with units shipped to USA) is used to connect mains power to the device at any input voltage between 85VAC and 250VAC at 50 or 60HZ.
A combined premium quality rotary potentiometer and switch fitted with a black aluminium fluted knob on the left-hand side of the front panel controls the VU meter back-light brightness and allows the user to turn the appliance off and on although the unit has an automatic standby function which allows the unit to be left on at all times, switching the lighting off in the absence of an audio input signal lasting approximately 15 minutes or longer.
The VU meter movements are positioned on the right of the combined rotary mains switch and potentiometer. They are scaled from -20 to +5 dB and a percentage scale from 0 to 100% is included. The assembly is 16cmD, 16cmW and 6.5cmH and weighs approximately 515 grams excluding the mains lead and connector.
We calibrate the meters to 0.7745V RMS at 0dB at 1KHZ but they can be set to consumer level (300mV RMS) or professional level (1.228V RMS) if required. Speaker input levels can also be set for applications where low level signal input is not available.
Backlighting is provided by internal white LEDs and the brightness can be adjusted from off to a dim warm white to bright white using the rotary mains switch and potentiometer control. Adjustments for zeroing the needles inside the instruments are located towards the bottom of the meter movements and can be corrected if necessary using a small flat screwdriver. The meters are elegant assemblies finished in black with an off-white scale and a visible movement coil assembly.
You can open a close-up view of the meters in a new tab by clicking the image on the right of the page.
4 units in stock! (Please note for USA postal regions a 23% tax applies to cover shipping costs)
994 Analogue VU Meter with Automatic Standby...£110.00 +VAT.... Add to Basket